 |
 |
 |
 |
 |
 |
 |
 |
We Accept    
|
LET IT BREATHE.  Clean, free-flowing air is as critical to your engine's performance as the octane of your fuel. Reduce the restrictions in your intake system, and you'll increase the output of your engine. Green High Performance Air Filters are engineered to maximize air flow while trapping harmful dirt particles. The result of this race-proven technology is increased horsepower, improved throttle response, better fuel mileage, and greater torque throughout your engine's rpm range. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Email us now for a quote
Because of its unique properties and organic composition, cotton is the ideal material for use in high performance air filters. But beyond the mere use of the material, Green High Performance Air Filters are uniquely designed, engineered, and manufactured to take full advantage of cotton's capabilities. Unlike multi-layer gauze filters which can fray and release fiber particles into your engine, Green uses 2 layers of tightly-interwoven cotton fabric. Cross-weaving one fine, and one medium layer, produces a fabric that is thinner and stronger than other materials, while maintaining the ability to trap harmful dirt particles as small as 5 microns. The result is better airflow without sacrificing filtration. And because the fabric is so durable, it can be washed DROP IT IN. FIRE IT UP. Green High Performance Air Filters come pre-oiled, so they're ready to use right out of the box. Pop open your air filter box, remove your stock filter and drop in a Green High Performance Air Filter.You simply can't perform a simpler, less expensive upgrade that yields as much improvement in engine performance.** BETTER FUEL MILEAGE Increased air flow to your cylinders results in a more potent air/fuel mixture. In addition to the performance enhancements Green Air Filters offer, you'll also reap the benefits of increased fuel mileage.  INCREASED
HORSEPOWERDynamometer bench testing on a 1800cc 4 cylinder engine showed that a Green High Performance Air Filter provided a 6.7% increase in horsepower over the same vehicle with a stock paper air filter. GREATER AIR FLOW In a side-by-side test bench comparison, Green High Performance Air Filters allowed greater air flow through its filtering surface than paper filters.  GREATER FILTERING CAPABILITY PEAK TEST AT 5500 RPMS Green Filters stop particles as small as 5 microns. Cotton Most cotton filters now are using 4 layers of cotton gauze. This material is good for filtering but the draw back to using it is that it is similar to a gauze bandage. Holes can be warn though the gauze, from cleaning & general everyday ware. Also little pieces of the warn cotton can be drawn into the engine from the intake pressure. Green Filters use 2 layers of woven cotton (like an oxford shirt). There are 3 main benefits to woven cotton, its: thinner, hold oil better, and is stronger. Being thinner the benefit is a little better flow of air but with out sacrificing the filtration. (Green still filters to 5 microns). Because Green is like an oxford-shirt, it holds the oil more evenly. Gauze is more sponge like so th oil can be pulled out by engine intake press, but with Green's woven cotton you don't have this problem. The other benefit of woven cotton is that the cotton medium is stronger. Unlike a gauze bandage you cannot ware a hole though an oxford-shirt just by rubbing it. One other important benefit of the cotton being woven (like an oxford-shirt) is there is no way for the small bits of cotton to be pulled into the engine because the cotton is inter-locked with another piece. The biggest benefit for our woven design is that the filter can be cleaned many more times. That is why we can offer a lifetime guarantee.  Pleats
Green Filter's pleat design gives the filter a number of benefits.
Something as simple as the direction of the pleat is important. With
a Green filter all of our pleats are parallel to the width. This makes
the filter more rigid so it is stronger. This also helps with air
leaks around the seal. Since the filter is more rigid, the edges around
the rubber will tend to stay sealed to the air-box. If the filter
was more flexible, it could cave in due to engine intake pressure.
This would allow dirty air to leak into the gap made between the seal
and air-box, which defeats the purpose of having an air filter. Another
benefit with the pleats being arranged this way is that we are able
to fit more pleats on the filter. If the rubber is cut off the filter
(all you have left is the cotton and mesh), you can stretch the filter
out and you would have a larger piece of cotton than most filters.
The more surface area you have the more air you can pass though the
filter and into you engine to create more power. Rubber molding around
the Seal Green Filter is on the cutting edge with rubber seal molding
design. Most other cotton filters have used a process of pressure
mold injecting. This process is good and saves time but the draw back
is that a large percentage of the rubber leaks onto the cotton filtering
surface area. So at times up to 20 - 25% of flowing surface area is
blocked by spill over rubber. This is especially important on the
smaller filters because if a 1/4" is blocked around the sides
of a filter (and the filter is only 4or 5 inches long), then about 25% of the surface area is lost. Green filter has taken a different approach with the rubber moldings of our filters. We use a four step process. It takes a lot more time and cost more to do but is worth it. Green filter's moldings are almost exact around the edges with no wasted surface area. Using this more efficient process the air flow is greater than the same size filter that is mold injected. Custom Fitment Tabs Green Filter has developed a unique filter fitment design. Included with our filter, we have designed a two stage trimmable tab molded into the rubber seal to custom fit the filters to a brand new air-box or one that been slightly damaged. Air-boxes are plastic and can warp out of shape or even melt from the heat in the engine compartment. These tabs also benefit the filter by centering and aligning it in the airbox, so the filter is evenly sealed. Economical A paper filter should be replaced between 4,000 to 5,000 miles or every oil change. The average cost of a paper filter is about $10 to $12. After one year of driving 15,000 miles, at least 3 paper filters are needed. This totals about $30 - $35. After one to two years, a Lifetime Green Filter is already paid for. This benefit is for everyone - a daily driver, an older vehicle or someone looking for the best performance.  Superior Filtration Green High Performance Air Filters are a lifetime filter designed to be oiled. The oil creates a positive (+) magnetic charge with the mesh, which attracts the negatively (-) charged dust particles. The dust and dirt builds around the mesh to form a tunnel. This allows the cotton to remain cleaner for maximum flow. Hardware With most filters they are using chrome for the end cap of there filter. Although they look nice, they do not last as long. For all Green filter hardware we use Polished Stainless Steel. It has the same high shine and custom look with no maintenance and a long life. Green Filter vs. the common cotton filter. There are a number of differences between the Green design and the design of other filters. * The Aluminum Housing acts as a heat shield * Venture on the top of the filter to speed the air up and remove the turbulence * The dirt and dust is gathered on the inside of the shield for easy cleaning * Bottom aluminum mount is equipped with a velocity stack to ram the air into the throttle body |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ***The
information above is taken from GreenFilterUSA.com's literature and
site*** For more information visit http://www.greenfilterusa.com/ Click here for Returns Policy - Delivery Info |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
